CALYPSO: True Position of a Slot with MMC - Formulas
How to Evaluate True Position of a Slot with MMC In CALYPSO
Create a Pallet in AutoRun
Measure a series of parts or several parts in a AutoRun pallet.
Calypso’s Circular Pitch
Excerpt from the Calypso Handbook
CALYPSO determines the circular pitch for all features and outputs the results either to CALYPSO or according to DIN 3960.
Calypso Planner Simulation - Placing a part on the CMM
How to place a part on the cmm table using Calypso Plannner
Flatness - GD&T and Calypso Rev 3 Book
Flatness (form tolerance): the tolerance zone is limited by two parallel planes a distance t apart.
Implies: Straightness of the surface or Straightness of the derived median line
Calypso - Blind Hole Depth
This is an excerpt from the Calypso Handbook
To measure the depth of a blind hole we must calculate the depth by using this process.
Calypso - Point Recall with Loop
This will create a wall thickness 360° around the part top and bottom 8 points each.
Program
Form Datum - Calypso
What the Form Datum does is establish a FUNCTIONAL Datum Reference Frame coordinate system, similar to if you were setting up the primary, secondary, and tertiary datums on a functional checking gage. This is ONLY for a datum reference frame and does not modify how the base and secondary alignments evaluate their respective coordinate system. In the screen shot below, you can notice the different origin points are for a base alignment and datum reference frame.
Calypso - Condition Based on Confirm Statement
What to expect. Yes, (it does exist) the CMM will measure the 35 Deg Bore. No, (does not exist) it will skip the 35 Deg Bore and move to the .875 diameter.